Asus P5GDC Pro - Manual (Page 130)

5 - 2 2 5 - 2 2 5 - 2 2 5 - 2 2 5 - 2 2 C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows ®
2000/XP operating system on a hard disk drive that is included in a RAID
set.
To create a RAID driver disk:
1. Place the motherboard support CD in the optical drive.
2. When the D r i v e r s D r i v e r s D r i v e r s D r i v e r s D r i v e r s menu appears, select the RAID driver disk you wish
to create.
Browse the contents of the support CD to locate the driver disk
utility:
I n t e l I n t e l I n t e l I n t e l I n t e l ® RAID Driver Disk RAID Driver Disk RAID Driver Disk RAID Driver Disk RAID Driver Disk:
\Drivers\Chipset\Intel\IAA\F6 Install Floppy\F6flpy32
3. Insert a formatted high-density floppy disk to the floppy disk drive.
4. Follow screen instructions to complete the process.
5. After creating a RAID driver disk, eject the floppy disk, then
write-protect it to prevent computer virus infection.
To install the RAID driver:
1. Install an operating system to the selected hard disk drive. During
installation, the computer prompts you to press the F 6
F 6 F 6 F 6 F 6 key if you are
installing a third-party SCSI or RAID driver.
2. Press , then insert the RAID driver disk to the floppy disk drive.
3. Follow screen instructions to install the RAID drivers.
Refer to section “5.2.2 Drivers menu” for details.