Asus P9D-MH/SAS/10G-DUAL - Manual (Page 94)

4-28 Chapter 4: BIOS setup
Network stack [Disabled]
Enables or disables the network stack feature. Configuration options: [Disabled] [Enabled]
The following items only appears when you set Network Stack to [Enabled].
Ipv4 PXE Support [Enabled]
Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be
created. Configuration options: [Disabled] [Enabled].
Ipv6 PXE Support [Enabled]
Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be
created. Configuration options: [Disabled] [Enabled].
4.4.17 Network Stack
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Network Stack [Disabled] Enable/Disable UEFI
network stack
4.4.16 Onboard LAN BCM57840S Configuration
Allows you to configure the onboard LAN BCM57840S.
BCM57840S LAN Enable [Enabled]
Allows you to enable or disable the onboard BCM57840S LAN. Configuration options:
[Enabled] [Disabled]
BCM57840S LAN Enable [PXE]
Allows you to disable BCM57840S LAN OpROM or select between iSCSI or PXE.
Configuration options: [Disabled] [PXE] [iSCSI]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Onboard LAN BCM57840S Configuration
BCM57840S LAN Enable [Enabled]
BCM57840S LAN OpROM [PXE]
BCM57840S LAN Enable/
Disable