beautypg.com

Azalia controller [enabled, Onboard lan [enabled, Ite8211 controller [enabled – Asus P5GD1-VM User Manual

Page 67: Serial port1 address [3f8/irq4

background image

A S U S P 5 G D 1 - V M

A S U S P 5 G D 1 - V M

A S U S P 5 G D 1 - V M

A S U S P 5 G D 1 - V M

A S U S P 5 G D 1 - V M

2 - 2 3

2 - 2 3

2 - 2 3

2 - 2 3

2 - 2 3

2.4.4

2.4.4

2.4.4

2.4.4

2.4.4

Onboard Devices Configuration

Onboard Devices Configuration

Onboard Devices Configuration

Onboard Devices Configuration

Onboard Devices Configuration

Configure Win627EHF Super IO Chipset

Azalia Controller

[Enabled]

Onboard LAN

[Enabled]

LAN Boot ROM

[Disabled]

ITE8211 Controller

[Enabled]

Detecting Device Time

[Quick Mode]

Serial Port1 Address

[3F8/IRQ4]

Parallel Port Address

[378]

Parallel Port Mode

[ECP]

ECP Mode DMA Channel

[DMA3]

Parallel Port IRQ

[IRQ7]

Azalia Controller [Enabled]

Azalia Controller [Enabled]

Azalia Controller [Enabled]

Azalia Controller [Enabled]

Azalia Controller [Enabled]

Enables or disables the Azalia controller.
Configuration options: [Enabled] [Disabled]

OnBoard LAN [Enabled]

OnBoard LAN [Enabled]

OnBoard LAN [Enabled]

OnBoard LAN [Enabled]

OnBoard LAN [Enabled]

Enables or disables the onboard LAN controller. Configuration options:
[Disabled] [Enabled]

LAN Boot ROM [Disabled]
Allows you to enable or disable the LAN Boot ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set
to Enabled. Configuration options: [Disabled] [Enabled]

ITE8211 Controller [Enabled]

ITE8211 Controller [Enabled]

ITE8211 Controller [Enabled]

ITE8211 Controller [Enabled]

ITE8211 Controller [Enabled]

Enables or disables the onboard ITE

®

8211F controller.

Configuration options: [Enabled] [Disabled]

Detecting Device Time [Quick Mode]
Sets the ITE

®

8211F detecting device time. If the devices installed on

the IDE connectors cannot be detected, set this item to Standard
Mode to enable complete detecting process. This item appears only
when the ITE

®

8211F Controller is set to [Enabled].

Configuration options: [Standard Mode] [Quick Mode]

Serial Port1 Address [3F8/IRQ4]

Serial Port1 Address [3F8/IRQ4]

Serial Port1 Address [3F8/IRQ4]

Serial Port1 Address [3F8/IRQ4]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3]

Enable or disable
Azalia controller.