Asus P5N-E SLI - Manual (Page 86)

2-34 Chapter 2: BIOS setup
Onboard nVidia LAN [Enabled]
Enables or disables the onboard NVIDIA® Gigabit LAN controller.
Configuration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard NVIDIA® LAN boot ROM.
Configuration options: [Enabled] [Disabled]
Onboard 1394 [Enabled]
Enables or disables the onboard 1394 device support.
Configuration options: [Disabled] [Enabled]
JMicron SATA controller [Enabled]
Enables or disables the JMiron SATA controller.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3] [Auto]
Parallel Port Address [378/IRQ7]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Parallel Port Mode [EPP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [EPP] [ECP] [Bi-Directional]
The following item appears only when the Parallel Port Mode is set to
[ECP].
ECP Mode Use DMA [3]
Allows selection of ECP Mode. Configuration options: [1] [3]