Asus P5N-E SLI - Manual (Page 91)

ASUS P5N-E SLI 2-39
2.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press to display
the configuration options.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
Hardware Monitor
CPU Q-Fan Control [ Disabled ]
Chassis Q-Fan Control [Disabled]
Vcore Voltage [1.32V]
3.3V Voltage [3.28V]
5V Voltage [4.94V]
12V Voltage [11.84V]
CPU Temperature 66ºC
M/B Temperature 38ºC
CPU FAN Speed 4470 RPM
CHA_FAN1 Speed 0 RPM
CHA_FAN2 Speed 0 RPM
CPU Fan Speed warning [600 RPM]
Phoenix-Award BIOS CMOS Setup Utility
Power
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature.
Configuration options: [Disabled] [Enabled]
Chassis Q-Fan Controller [Disabled]
Allows you to enable or disable the ASUS Chassis Q-Fan feature.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, +3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators. These items can be set to [Ignored].
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed, CHA_FAN1 Speed, CHA_FAN2 Speed
The onboard hardware monitor automatically detects and displays the CPU,
Power, and Chassis fan speeds in rotations per minute (RPM). If the fan is
not connected to the motherboard, the field shows 0. These items are not
user-configurable.
CPU Fan Speed Warning [600 RPM]
Allows you to set the CPU fan warning speed.
Configuration options: [Disabled] [600 RPM] [1200 RPM] [1600 RPM]