Q-fan controller [disabled, Cpu temperature, m/b temperature, Cpu fan speed – Asus A8N-E User Manual

Page 81

A S U S A 8 N - E

2 - 3 5

2.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press to display
the configuration options.

F1:Help

↑↓

: Select Item

-/+: Change Value

F5: Setup Defaults

ESC: Exit

→←

: Select Menu

Enter: Select Sub-menu

F10: Save and Exit

Select Menu

Item Specific Help

Press [Enter] to
enable or disable

Hardware Monitor

Q-Fan Controller

[

Disabled

]

Vcore Voltage

1.50V

3.3V Voltage

3.31V

5V Voltage

4.94V

12V Voltage

11.26V

CPU Temperature

48ºC

M/B Temperature

38ºC

CPU FAN Speed

4962 RPM

CHA1 FAN Speed

0 RPM

CHIP FAN Speed

5443 RPM

x CPU Target Temperature

72ºC

Phoenix-Award BIOS CMOS Setup Utility

Power

Q-Fan Controller [Disabled]

Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]

VCORE Voltage, +12V Voltage, 3.3V Voltage, 5VCC

VCORE Voltage, +12V Voltage, 3.3V Voltage, 5VCC
Voltage

Voltage

The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators. These items are not
user-configurable.

CPU Temperature, M/B Temperature

The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.

CPU Fan Speed

CPU Fan Speed
CHA1 Fan Speed

CHA1 Fan Speed

CHA1 Fan Speed
CHIP Fan Speed

CHIP Fan Speed

The onboard hardware monitor automatically detects and displays the
Chassis, CPU, and Chip fan speeds in rotations per minute (RPM). If the fan
is not connected to the motherboard, the field shows 0. These items are
not user-configurable.