Asus A8N-E - Manual (Page 65)

A S U S A 8 N - E A S U S A 8 N - E A S U S A 8 N - E A S U S A 8 N - E A S U S A 8 N - E 2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9
2.3.6 2.3.6 2.3.6 2.3.6 2.3.6 First, Second, Third, Fourth SATA Master First, Second, Third, Fourth SATA Master First, Second, Third, Fourth SATA Master First, Second, Third, Fourth SATA Master First, Second, Third, Fourth SATA Master
While entering Setup, the BIOS automatically detects the presence of Serial
ATA devices. There is a separate sub-menu for each SATA device. Select a
device item then press to display the SATA device information.
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Precomp, Landing Zone and Sector). These
values are not user-configurable. These items show 0 if no SATA device is
installed in the system.
Extended Drive Extended Drive Extended Drive Extended Drive Extended Drive
Selects the type of fixed disk connected to the system.
Configuration options: [None] [Auto]
Access Mode Access Mode Access Mode Access Mode Access Mode
Sets the sector addressing mode. Configuration options: [Large] [Auto]
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select Sub-menu F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Main
Select Menu
Item Specific Help
Press [Enter] to
select
Primary IDE Master
Extended Drive [ Auto ]
Access Mode [Auto]
Capacity xxxxx MB
Cylinder xxxxx
Head xx
Precomp xx
Landing Zone xx
Sector xx
Before attempting to configure a hard disk drive, make sure you have
the correct configuration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.
Capacity Capacity Capacity Capacity Capacity
Displays the auto-detected hard disk capacity. This item is not
configurable.
Cylinder Cylinder Cylinder Cylinder Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.