Asus A8N-E - Manual (Page 63)

A S U S A 8 N - E A S U S A 8 N - E A S U S A 8 N - E A S U S A 8 N - E A S U S A 8 N - E 2 - 1 7 2 - 1 7 2 - 1 7 2 - 1 7 2 - 1 7
2.3.5 2.3.5 2.3.5 2.3.5 2.3.5 Primary and Secondary IDE Master/Slave Primary and Secondary IDE Master/Slave Primary and Secondary IDE Master/Slave Primary and Secondary IDE Master/Slave Primary and Secondary IDE Master/Slave
While entering Setup, the BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a device
item then press to display the IDE device information.
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not
user-configurable. These items show N/A if no IDE device is installed in the
system.
PIO Mode PIO Mode PIO Mode PIO Mode PIO Mode
Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3]
[Mode 4]
UDMA Mode UDMA Mode UDMA Mode UDMA Mode UDMA Mode
Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]
IDE Primary Master/Slave [Auto]; IDE Secondary Master/ IDE Primary Master/Slave [Auto]; IDE Secondary Master/ IDE Primary Master/Slave [Auto]; IDE Secondary Master/ IDE Primary Master/Slave [Auto]; IDE Secondary Master/ IDE Primary Master/Slave [Auto]; IDE Secondary Master/
Slave [Auto]
Slave [Auto] Slave [Auto] Slave [Auto] Slave [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic
detection is successful, the BIOS automatically fills in the correct values for
the remaining fields on this sub-menu. If the hard disk was already
formatted on a previous system, the setup BIOS may detect incorrect
parameters. Select [Manual] to manually enter the IDE hard disk drive
parameters. If no drive is installed select [None].
Configuration options: [None] [Auto] [Manual]
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select Sub-menu F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Main
Select Menu
Item Specific Help
Press [Enter] to
select
Primary IDE Master
PIO Mode [ Auto ]
UDMA Mode [Auto]
Primary IDE Master [Auto]
Access Mode [Auto]
UDMA Mode [Auto]
Capacity 13579 MB
Cylinder 26310
Head 16
Sector 63
Transfer Mode UDMA 4