Asus M4A78-HTPC/RC - Manual (Page 56)

2-10 ASUS M4A78-HTPC
PCIE Clock [xxx]
This item appears only when you set the PCIE OverClocking item to [Manual] and
allows you to manually set the PCIE frequency. Use the <+> and <-> keys to adjust
the value. You can also type the desired value using the numeric keypad. The values
range from 100 to 150.
Processor Frequency Multiplier [Auto]
Allows you to adjust the ratio between CPU Core Clock and FSB Frequency.
Configuration options: [Auto] [x8.0 1600 MHz] [x8.5 1700 MHz] [x9.0 1800 MHz] [x9.5 1900
MHz] [x10.0 2000 MHz] [x10.5 2100 MHz] [x11.0 2200 MHz] [x11.5 2300 MHz]
Processor Voltage [Auto]
Allows you to set the CPU VCore voltage.
Configuration options: [Auto] [+ 50mv] [+ 100mv] [- 100mv]
Processor-NB Voltage [Auto]
Allows you to set the voltage between the CPU and Northbridge.
Configuration options: [Auto] [+ 50mv] [+ 100mv] [- 100mv]
Hyper Transport Speed [Auto]
Allows you to set the CPU-Northbridge HyperTransport link speed.
Configuration options: [200 MHz] [400 MHz] [600 MHz] [800 MHz] [1 GHz] [1.2 GHz]
[1.4 GHz] [1.6 GHz] [1.8 GHz] [Auto]
Hyper Transport Width [Auto]
Allows you to set the CPU-Northbridge HyperTransport link width.
Configuration options: [Auto] [4 Bit] [8 Bit] [16 Bit]
Memory Clock Mode [Auto]
Allows you to select the DRAM frequency control method.
Configuration options: [Auto] [Manual]
Memclock Value [xxx]
This item appears only when you set the Memory Clock Mode item to [Manual] and
allows you to manually set the DRAM frequency.
Configuration options: [667MHz] [800MHz] [1067MHz]
DRAM Timing Mode [Auto]
Allows selection of the DRAM Timing Mode.
Configuration options: [Auto] [Both]
The following sub-items appear only when you set the DRAM Timing Mode item to [Both].
CAS Latency (CL) [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only]
TRCD [Auto]
Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto]
TRP [Auto]
Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto]