Asus AP120-E1 - Manual (Page 133)

ASUS P4P800S-E Deluxe motherboard user guide 5-27
5.4.4 Creating a RAID Volume
To create a RAID 0 volume:
1. Select the option 1. Create RAID Volume from the Main menu, then
press . The Create Array menu appears.
2. Type a name for your RAID volume using 1 to 16 characters (letters
and/or numbers, no special characters). Press .
3. Use the Up and Down arrow keys to select the stripe size for the
RAID0 array . Press to make the selection.
The available values range from 8 KB to 128 KB. The default is 64 KB.
Select a stripe value from the following suggestions depending on your
planned drive usage.
• 16 KB - low disk usage
• 64 KB - typical disk usage
• 128 KB - performance disk usage
4. Highlight Create Volume then press to create the array. Press
Y when a confirmation message appears.
5. Scroll down to option 4. Exit and press to exit the RAID
configuration utility. Press Y when a confirmation message appears.