Asus L1A - Manual (Page 20)

20
Knowing the Parts
Rear Side
Refer to the diagram below to identify the components on the rear side of the Notebook PC.
The following describes the components on the rear side of the Notebook PC as shown by the illustra-
tion above.
LAN Port
The RJ-45 LAN port supports an RJ-45 Ethernet cable. The internal LAN supports 10Base-T or 100Base-
TX standard or duplex networks. The built-in connector allows convenient use without a dongle.
Modem Port
The RJ-11 telephone port supports an RJ-11 telephone cable. The internal modem supports up to 56K
V.90 transfers. The built-in connector allows convenient use without a dongle.
WARNING! The built-in modem does not support the voltage used in digital phone
systems. Do not connect the modem port to a digital phone system or else damage
will occur to the Notebook PC.
External Monitor Port
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or pro-
jector to allow viewing on a larger external display.
Parallel Port (and external floppy port)
The 25-pin D-sub parallel/printer port supports parallel devices such as a printer. An external floppy drive
module can also connect to this port using the provided cable. (You must turn OFF the Notebook PC when
connecting or disconnecting the floppy drive module from the parallel port.)
Ai-Box Port (depending on model)
The Ai-Box port is for connection to an optional Ai-Box to provide docking features to desktop periph-
erals and storage devices. More details given later.
Modem Port (RJ-1
1)
LAN Port (RJ-45)
Parallel Port External
Monitor
Port
TV-Out Air Vent & Fan PS/2
Port
T
USB
Port
AI-Box
Port