Asus GigaX2124X/C - Manual (Page 78)

GigaX Series L2 Managed Switch User’s Guide
78
[Limit]
Displays the current rate limitation value of the switch. User can change this
value by giving a new limit value. This value is applied to all of the traffic control
mentioned above.
CLI command : l2 rate limit
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 rate retrieve
[Aging Time]
User can set the ARL (Address Resolution Logic) entries aging time by setting
the aging time value.
CLI command : l2 arl age [aging time value]
[Query by Port]
ARL entries existed in ARL table can be queried according to port number.
CLI command : l2 arl port
[Query by VLAN ID]
ARL entries existed in ARL table can be queried according to VLAN ID.
CLI command : l2 arl vlan
[Query by MAC Address]
ARL entries existed in ARL table can be queried according to MAC address.
CLI command : l2 arl mac [vlan id]