Asus GigaX2124X/C - Manual (Page 76)

GigaX Series L2 Managed Switch User’s Guide
76
CLI command : l2 port lacppri [
Reload]
Restores the previous saved settings of trunk from configuration file.
CLI command : l2 trunk retrieve
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch.
CLI command : l2 mirror create
CLI command : l2 mirror ingress
CLI command : l2 mirror egress
CLI command : l2 mirror remove
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 mirror retrieve
[Show Multicast Group]
Displays the static multicast groups that are presented in the multicast
group table.
CLI command: l2 mcast show
[Set Multicast Group] Allows user to add or modify a static multicast group by
specifying the MAC address, VLAN ID, Class of Service, VLAN port members,
and its untagged port members. Note that MAC address and VLAN ID
combination is formed as an unique entry in multicast group table
CLI command: l2 mcast set
mac address [format: xx:xx:xx:xx:xx:xx]:
vlan id [1 by default]: