Asus GigaX2124X/C - Manual (Page 74)

GigaX Series L2 Managed Switch User’s Guide
74
[Priority]
[Path Cost]
[Edge Port]
[Point-to-point]
Displays the current STP/RSTP ports parameters setting.
CLI command : l2 stp port set
Port Settings (all,…):[all] iteratively config> Port Priority (0..255):[old port Priority] Port Path Cost (1..65535):[old port Path Cost] Path Cost> Port EdgePort (yes/no):[old port EdgePort] EdgePort > Port Point-to-Point (yes/no/auto):[old port Point-to-Point]
[Reload] Restores the previous saved settings from configuration file. CLI command : l2 stp retrieve CLI command : l2 stp bridge retrieve CLI command : l2 stp port retrieve [Show Trunk] Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag), LACP mode (enabled or disable), and its trunk group member ports. CLI command : l2 trunk show [rtag] Sets traffic distribution algorithm (1~3). The “rtag” is the packet distribution
algorithm for the trunk group. Pages: 1 … 72 73 74 75 76 … 112 wrong Brand wrong Model non readable See also other documents in the category Asus Communication: GX1026i (26 pages) GX-D1241 (48 pages) GX1026 (73 pages) GX-D1081 (8 pages) GigaX1024X (41 pages) GigaX1024X (57 pages) FX-D1162 (103 pages) RX3041_B (36 pages) GigaX3124 (326 pages) SL200 (52 pages) SCSI/PCI-L3C920 (16 pages) GigaX3024X (137 pages) RX3041H (143 pages) SL1000 (8 pages) RX3041 (63 pages) GigaX1008B (46 pages) GigaX1005B (46 pages) GigaX1005N (60 pages) GigaX2024X (119 pages) GigaX1105N (57 pages) GigaX1108N (8 pages) GigaX1105N (41 pages) SL1200 (18 pages) SL1200 (175 pages) EI-102 (41 pages) GigaX1116 (12 pages) AX-112 (26 pages) GigaX2124X (116 pages) PL-X31M/PL-X32M (105 pages) NX1001 (44 pages) NX1001 (47 pages) GX1105N (145 pages) GigaX1124 (10 pages) GigaX3112F (118 pages) RX3042H (129 pages) GigaX1105 (10 pages) GigaX2008EX (71 pages) GigaX2024SX (370 pages) CX200 (94 pages) CX200 (5 pages) GigaX2024 (115 pages) GigaX2024 (169 pages) GigaX2124 (122 pages) GigaX1116B (97 pages) Sitemap
Port Priority (0..255):[old port Priority]
Port Path Cost (1..65535):[old port Path Cost] Path Cost>
Port EdgePort (yes/no):[old port EdgePort] EdgePort >
Port Point-to-Point (yes/no/auto):[old port Point-to-Point]
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 stp retrieve
CLI command : l2 stp bridge retrieve
CLI command : l2 stp port retrieve
[Show Trunk]
Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag), LACP mode (enabled or disable), and its trunk group member ports.
CLI command : l2 trunk show
[rtag]
Sets traffic distribution algorithm (1~3). The “rtag” is the packet distribution
algorithm for the trunk group.