Asus TS150-E2 - Manual (Page 38)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2
3 3 3 3 3
2.9.2 2.9.2 2.9.2 2.9.2 2.9.2 Removing the chassis fan Removing the chassis fan Removing the chassis fan Removing the chassis fan Removing the chassis fan
To remove the chassis fan:
1. Disconnect the chassis fan cable from the REAR_FAN1 connector on
the motherboard.
2. Locate and remove four chassis
fan screws at the rear panel.
Keep the screws for later use.
Hold the chassis fan with one
hand while removing the
chassis fan screws.
2 2 2 2 2
3 3 3 3 3
3. Remove the chassis fan, then
set aside.
3. Move the drive bay lock toward
the rear panel to secure the
lock.
4. Attach the FDD power and signal
cables to the connectors at the
back of the drive.