Asus P4RD1-MX - Manual (Page 70)

2-30 Chapter 2: BIOS setup
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By OnBoard LAN [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through an onboard LAN module.
Configuration options: [Disabled] [Enabled]
2.5.6 Hardware Monitor
Hardware Monitor
MB Temperature [36ºC/96.5ºF]
CPU Temperature [39ºC/102.5ºF]
CPU Fan Speed [3902 RPM]
Chassis Fan Speed [N/A]
Power Fan Speed [N/A]
VCORE Voltage [ 1.360V]
3.3V Voltage [ 3.264V]
5V Voltage [ 5.034V]
12V Voltage [11.855V]
MB Temperature [xxx°C/ xxx°F]
CPU Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Disabled if you do not wish to
display the detected temperatures.
The Power On By OnBoard LAN item shows up only when the Power On
By PCI Devices item is set to Enabled.