Asus P4RD1-MX - Manual (Page 36)

1-24 Chapter 1: Product introduction
6. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB/GAME
module cable to any of these connectors, then install the module to a
slot opening at the back of the system chassis.
5. CPU, Power, and Chassis fan connectors
(4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN)
The fan connectors support cooling fans of 350mA~2000mA (24W max.)
or a total of 1A~3.48A (41.36W max.) at +12V. Connect the fan cables
to the fan connectors on the motherboard, making sure that the black
wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on the
fan connectors.
The USB/Game module is purchased separately.
P4RD1-MX
®
P4RD1-MX Fan connectors
CPU_FAN
PWR_FAN
CHA_FAN
GND
Rotation
+12
V
CPU_FAN
PWR_FAN
CHA_FAN
GND
Rotation
+12V
GND
Rotation
+12V
P4RD1-MX
®
P4RD1-MX USB 2.0 connectors
USB56
USB+5V USB_P6- USB_P6+ GND NC
USB+5V USB_P5- USB_P5+
GND
1
USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V USB_P7- USB_P7+
GND
1