Asus WL-330gE - Manual (Page 62)

4-32 Chapter 4: Configuration
Factory Default
Restoring Factory Default Settings
Web Manager
You can reset all settings to their factory default settings through the web manager
using the “Factory Default” page in “Advanced Setup”. Click the Restore button
and wait about 30 seconds before trying to access the ASUS 802.11g AP.
Hardware
You can reset all settings to their factory defaults manually by pushing the “Reset”
button of the ASUS 802.11g AP while it is ON. See page 21. Push the “Reset”
button with a pen or a paper clip for about 5 seconds or until the power LED starts
blinking.
Note: You will be notified when factory default settings are restored while using
the web manager.