Asus WL-330gE - Manual (Page 41)

4-11 ASUS WL-330gE Portable Wireless Access Point
High: Only users with the same WPA pre-shared key settings can connect to
your wireless router and transmit data using TKIP encryption.
5. Input one set of WEP keys in the WEP Key fields (10 hexadecimal digits for
WEP 64bits, 26 hexadecimal digits for WEP 128bits), and then select from
Key Index accordingly. You can also let the system generate the keys by
inputting a Passphrase. Record the Passphrase and the WEP keys in your
notebook, then select from Key Index accordingly. Click Finish to enable your
setting. For example, if we input 11111 as the Passphrase, the WEP Keys are
generated automatically.
6. Click Save&Restart to restart the wireless router and activate the new
settings.
4.3.3 Quick Setup in Home Gateway Mode
To start quick setup in Gateway mode, click Apply to enter the “Quick Setup” page.
To set up the ASUS 802.11g AP:
1. Click System Setup -> Operation Mode -> Home Gateway. In the Home
Gateway mode, you will be able to connect to the Internet through ADSL or
cable modem.
2. Click Apply to enter the
Gateway mode.
3. Select your time zone or the
closest region. Click Next to
continue.
4. The ASUS 802.11g AP supports five types of ISP services— cable, ADSL
(PPPoE, PPTP, static IP address), and Telstra BigPond. Since each service
has its own protocols and standards, therefore, during the setup process,
there are different identity settings demanded by the Access Point. Select the
correct connection type and click Next to continue.