Asus A7V(MB) - Manual (Page 70)

ASUS A7V User’s Manual 70
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
Primary VGA BIOS [PCI Card]
If your computer has both PCI and AGP VGA cards, this field allows ¥ou to
select which of the cards will act as your primary graphics card. [AGP Card]
uses the AGP card as your primary card. The default, [PCI Card], allows
your PCI graphics card to take precedence when detected. Configuration
options: [PCI Card] [AGP Card]
Onboard ATA device First [Yes]
When set to [Yes], this field allows the devices on the ATA/100 channel to
be bootable. Configuration options: [No] [Yes]
IRQ XX Reserved for Legacy Device [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by an onboard legacy (non-PnP) ISA device. The default value
indicates either that the displayed IRQ is not used or that ISA Configuration
Utility (ICU) is being used to determine if an ISA device is using that IRQ.
Configuration options: [No/ICU] [Yes]
PCI/PNP IRQ Resource Exclusion