Asus PCE-N13 - Manual (Page 21)

ASUS WLAN Adapter 21
Chapter 2 - Installation
Chapter 2 Installation
Configuring with the WLAN utility
(Infrastructure)
Use ASUS WLAN utility to get connected with an existing wireless network.
6. Check the Connection tab to see the
signal strength. Click OK to exit the utility.
5. Check the Status page to see the
association state. If connection is
established, the box shows “Connected -
xx:xx:xx:xx:xx:xx”.
3. Use Site Survey if you do not know the
SSID of your access point.
4. Encryption settings must match those
at the access point. Ask your network
administrator about the settings if
necessary. Click Apply to activate the
settings.
1. Right-click the wireless connection icon
and select Wireless Settings.
2. Check the Config page to set the SSID
(network name) to that of your wireless AP.