Asus P8B WS - Manual (Page 85)

ASUS P8B WS 3-9
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU
internal frequency. This item appears only when you install X.M.P. memory
modules to the motherboard. Select any of these preset overclocking configuration
options:
[Auto]
Loads the optimal settings for the system.
[X.M.P.] If you install memory modules supporting the eXtreme Memory
Profile (X.M.P.) Technology, choose this item to set the profiles
supported by your memory modules for optimizing the system
performance.
BCLK/PEG Frequency [XXX]
Allows you to adjust the CPU and VGA frequency to enhance the system
performance. This item only appears when you set Ai Overclock Tuner to
[X.M.P.]. Use the <+> and <-> keys to adjust the value. You can also key in the X.M.P.]. Use the <+> and <-> keys to adjust the value. You can also key in the ]. Use the <+> and <-> keys to adjust the value. You can also key in the
desired value using the numeric keypad. The values range from 80.0MHz to
300.0MHz.
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary
with the BCLK/PEG Frequency item settings.
Selecting a very high memory frequency may cause the system to become
unstable! If this happens, revert to the default setting.
iGPU Max. Frequency [Auto]
Allows you to adjust the iGPU Max. frequency. Set this item to [Auto] to optimize
the frequency depending on the system loading. Or use the <+> and <-> keys to use the <+> and <-> keys to
adjust the value.
iGPU Max. Frequency is available only when you install a desktop processor
that supports onboard graphics to the motherboard and there is no other VGA
cards installed on the motherboard.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
EPU Setting [Auto]
This item appears only when you set the EPU Power Saving Mode item to
[Enabled.] and allows you to select the EPU power saving mode.
Configuration options: [AUTO] [Light Power Saving Mode] [Medium Power Saving
Mode] [Max Power Saving Mode]