beautypg.com

Chapter 2 – Asus P8C WS User Manual

Page 37

background image

ASUS P8C WS

2-19

Chapter 2

You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and

then install the Q-Connector (USB) to the USB connector onboard if your chassis supports

front panel USB ports.

Never connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

3.

USB 2.0 connectors

(Type A: 10-1 pin USB1314; Type B: USB11/ USB12)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of

these connectors, then install the module to a slot opening at the back of the system

chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.