Asus CUSL2-C - Manual (Page 33)

ASUS CUSL2-C User’s Manual 33
3. HARDWARE SETUP
Connectors
3. H/W SETUP
DMA Channels
3. H/W SETUP
8) Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-
tion when using ribbon cables with pin 5 plugged).
CUSL2-C
®
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
CUSL2-C Floppy Disk Drive Connector
PIN 1
FLOPPY
6) Game/MIDI Connector (Gold 15-pin GAME_AUDIO) (optional)
You may connect game joysticks or game pads to this connector for playing
games. Connect MIDI devices for playing or editing professional audio.
Joystick/MIDI (15-pin female)
7) Audio Port Connectors (Three 1/8” GAME_AUDIO) (optional)
Line Out (lime) can be connected to headphones or preferably powered speak-
ers. Line In (light blue) allows tape players or other audio sources to be re-
corded by your computer or played through the Line Out (lime). Mic (pink)
allows microphones to be connected for inputting voice.
Mic Line In Line Out
1/8" Stereo Audio Connectors