Asus CUSL2-C - Manual (Page 28)

28 ASUS CUSL2-C User’s Manual
3. HARDWARE SETUP
Expansion Cards 3. H/W SETUP
Interrupt Request Table for this Motherboard
Interrupt requests are shared as shown by the following table:
A B C D E F G H
PCI slot 1 — — — — — shared — —
PCI slot 2 — — — — — — not shared —
PCI slot 3 — — — — — — — not shared
PCI slot 4 — — — — shared — — —
PCI slot 5 — — — — — shared — —
PCI slot 6 — — not shared — — — — —
AGP not shared — — — — — — —
CNR LAN — — — — shared — — —
CNR Audio/Modem — not shared — — — — — —
IMPORTANT: If using PCI cards on shared slots, make sure that the drivers sup-
port “Share IRQ” or that the cards do not need IRQ assignments. Conflicts will arise
between the two PCI groups that will make the system unstable or cards inoperable.
3.7.3 Communication and Networking Riser (CNR) Slot
This connector supports specially designed network, audio, or modem riser cards.
Main processing is done through software and controlled by the motherboard’s sys-
tem chipset. This provides upgradeable network, audio, and/or modem solutions at
an incredibly low cost.
NOTE: CNRs are not included with this motherboard.
CUSL2-C
®
CUSL2-C Communication & Networking Riser Connector