Asus M2N32-SLI Premium VISTA Edition - Manual (Page 172)

5-52 Chapter 5: Software support
2. Select RAID 1 then press
to display the
following.
MAIN MENU
Auto configuration
Manual configuration
c. The selection bar moves to
the Physical Drive menu.
Using the up or down arrow
keys, select a drive then
press to set the
first drive of the RAID set.
d. Repeat step c to set the second, third, and fourth drive. The number of
available drives depend on the installed and enabled physical drives in
the system.
e. The utility prompts a message to input the RAID size, use the up or down
arrow keys to set the RAID size then press .
f. Press to confirm or to return to the Main Menu.
TIP: For server systems, we recommend using a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1. From the Silicon Image
configuration utility main
menu, select Create RAID
set then press .
The following sub-menu
appears.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE
RAID0
RAID1
SPARE DRIVE
CONCATENATION