Asus Maximus IV GENE-Z/GEN3 - Manual (Page 95)

ROG MAXIMUS IV GENE-Z/GEN3 3-7
Maximum Turbo Ratio setting (Adjustable in OS) [Auto]
This item only appears when you set Turbo Ratio to [All Cores mode (Adjustable
in OS)].
1/2/3/4-Core Ratio Limit [Auto]
This item appears only when you set Turbo Ratio to [By Number of Active Cores
Mode].
Use the <+> and <-> keys to adjust the value.
[Auto]
Using the factory-configured value.
1-Core Ratio Limit value must be higher than or equal to 2-Core Ratio Limit if it
is not set to [Auto]
Internal PLL Overvoltage [Auto]
Setting this item to [Enabled] allows K-SKU CPUs to get an extreme overclocking
capability. Configuration options: [Auto] [Enabled] [Disabled]
Memory Frequency [Auto]
Allows you to set the memory operating frequency.
Selecting a very high memory frequency may cause the system to become
unstable! If this happens, revert to the default setting.
Memory Bandwidth Booster [Disabled]
Allows you to enable or disable memory bandwidth booster.
Configuration options: [Enabled] [Disabled]
iGPU Max. Frequency [Auto]
[Auto] The iGPU frequency may be optimized depending on the system
loading.
[Manual] The input value is the optimal iGPU frequency. The values range The values range
from 1100Mhz to 3000Mhz with a 50Mhz interval.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]