2 uncore configuration, Uncore configuration -21, Chapter 3 – Asus P7P55D Premium User Manual
Page 85
ASUS P7P55D Premium
3-21
Chapter 3
Active Processor Cores [All]
[All]
Activate all CPU cores in the processor package.
[1]
Activate only 1 CPU core in the processor package.
[2]
Activate 2 CPU cores in the processor package.
A20M [Disabled]
[Enabled]
Legacy OSes and APs may need this function enabled.
[Disabled]
Disables this function.
Intel(R) SpeedStep (TM) Tech [Enabled]
[Enabled]
The CPU speed is controlled by the operating system.
[Disabled]
The CPU runs at its default speed.
Intel(R) TurboMode tech [Enabled]
[Enabled]
Allows processor cores to run faster than marked frequency in specific
condition.
[Disabled]
Disables this function.
Intel(R) C-STATE Tech [Disabled]
[Enabled]
Allows the CPU to save more power under idle mode. Enable this item only
when you install a C-State Technology-supported CPU.
[Disabled]
Disables this function.
C State package limit setting [Auto]
This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled]. We
recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode
supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]
3.6.2
Uncore Configuration
The Uncore Configuration menu allows you to change the advanced chipset settings.
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Uncore Configuration
IMC Type : Reserved
Memory Remap Feature
[Enabled]
PCI MMIO Allocation: 4GB To 3072MB
BIOS SETUP UTILITY
Advanced
Memory Remap Feature [Enabled]
[Disabled] Do not allow remapping of memory.
[Enabled] Allows for the segment of system memory that was previously overwritten
by PCI devices to be remapped above the total physical memory.