beautypg.com

1 system time, 2 system date, 3 sata 1~2 – Asus AT5IONT-I User Manual

Page 34: System time -5, System date -5, Sata 1~2 -5, 1 system time [xx:xx:xx

background image

ASUS AT5IONT-I Series

2-5

2.3.1

System Time [xx:xx:xx]

Allows you to set the system time.

2.3.2

System Date [Day xx/xx/xxxx]

Allows you to set the system date.

2.3.3

SATA 1~2

While entering Setup, the BIOS automatically detects the presence of SATA devices. There

is a separate sub-menu for each SATA device. Select a device item then press to

display the SATA device information.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,

LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These

values are not user-configurable. These items show Not Detected if no Serial ATA device is

installed in the system.

Type [Auto]

Selects the type of SATA drive. Setting to Auto allows automatic selection of the appropriate

SATA device type. Select CDROM if you are specifically configuring a CD-ROM drive. Select

ARMD (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.

Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device

supports this mode, and if the device was not previously formatted with LBA mode disabled.

Configuration options: [Disabled] [Auto]

Block (Multi-sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from

and to the device occurs multiple sectors at a time if the device supports multi-sector transfer

feature. When set to [Disabled], the data transfer from and to the device occurs one sector

at a time. Configuration options: [Disabled] [Auto]

PIO Mode [Auto]

Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]

This manual is related to the following products: