Asus P5SD2-A - Manual (Page 78)

2-30 Chapter 2: BIOS setup
Chassis Fan Speed [xxxxRPM] or [N/A] or [Ignored]
The onboard hardware monitor automatically detects and displays the chassis fan speed
in rotations per minute (RPM). If the fan is not connected to the chassis, the specific field
shows N/A. Select Ignored if you do not wish to display the detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
2.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press to display the sub-menu.
2.6.1 Boot Device Priority
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
Configuration options: [xxxxx Drive] [Disabled]
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive
B:) may appear when
you set the CD-ROM
drive as the first boot
device.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [ATAPI CD-ROM]
3rd Boot Device [Hard Drive]
Specifies the boot
sequence from the
available devices.
A device enclosed
in parenthesis has
been disabled in the
corresponding type
menu.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit