Asus P5SD2-A - Manual (Page 71)

ASUS P5SD2-A 2-23
Primary Graphics Adapter [PCI-E]
DRAM CAS# Latency [By SPD]
North Bridge Configuration
Primary Graphics Adapter [PCI-E]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI] [PCI-E]
DRAM CAS# Latency [By SPD]
Controls the latency between the SDRAM read command and the time the data
actually becomes available. Configuration options: [By SPD] [3T] [4T] [5T]
2.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
North Bridge SIS671DX Configuration
South Bridge SIS968 Configuration
This will switch the
PCI Bus scanning
order while searching
for video card.
This allows to
select the type of
Primary VGA in case
of multiple video
controllers.
Intel ® SpeedStep Technology [Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
The following item appears only when you installed an Intel ® Pentium ® 4 or later
CPU that supports the Enhanced Intel SpeedStep ® Technology (EIST).