Asus LSI SAS3442X-R User Manual

Page 35

Text mode
Original mode

Other Configuration Tasks

3-11

Version 1.1

The current topology is displayed. If the selection of a boot device is
supported, the bottom of the screen lists the Alt+B option. This is the
key for toggling the boot device. If a device is currently configured as
the boot device, the Device Info column on the SAS Topology screen
will show the word “Boot.”

To select a boot disk, move the cursor to the disk and press Alt+B.

To remove the boot designator, move the cursor down to the current
boot disk and press Alt+B. This controller will no longer have a disk
designated as boot.

To change the boot disk, move the cursor to the new boot disk and
press Alt+B. The boot designator will move to this disk.

Note:

The firmware must be configured correctly in order for the
Alt+B feature to work.