Asus P8H61-M LX3 R2.0 - Manual (Page 50)

2-12 ASUS P8H61-M LX3 R2.0 Series
2.4 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
2.4.1 Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto] Loads the optimal settings for the system.
[X.M.P.] If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by your
memory modules for optimizing the system performance.
The Ai Overclock Tuner appears only when you install a DIMM with X.M.P. support.
2.4.2 ASUS MultiCore Enhancement [Enabled]
[Enabled] Select this option for maximum performance under XMP/Manual/User
define memory frequency mode.
[Disabled] Select this option for default core ratio settings.
2.4.3 Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [DDR3-800MHz]
[DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz] [DDR3-1866MHz] [DDR3-2133MHz]
[DDR3-2400MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
[X.M.P.] When XMP is enabled BLCK
frequency, CPU ratio and memory
parameters will be auto optimized.
UEFI BIOS Utility - Advanced Mode
Target CPU Turbo Mode Speed : 3700MHz
Target DRAM Speed : 1333MHz
Ai Overclock Tuner Auto
ASUS MultiCore Enhancement Enabled
Memory Frequency Auto
> GPU Boost
> DRAM Timing Control
> CPU Power Management