beautypg.com

2 memory configurations, Memory configurations -14 – Asus P8H61-M LX3 R2.0 User Manual

Page 24

background image

ASUS P8H61-M LX3 R2.0 Series

1-14

1.7.2

Memory configurations

You may install 1GB, 2GB, 4GB and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM

sockets.

• The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value. To operate at the vendor-marked or at a

higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency

adjustment.

• For system stability, use a more efficient memory cooling system to support a full

memory load (2 DIMMs) or overclocking condition.

• You may install varying memory sizes in Channel A and Channel B. The system maps

the total size of the lower-sized channel for the dual-channel configuration. Any excess

memory from the higher-sized channel is then mapped for single-channel operation.

• Always install DIMMs with the same CAS latency. For optimum compatibility, we

recommend that you obtain memory modules from the same vendor.

• Due to the memory address limitation on 32-bit Windows

®

OS, when you install 4GB

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do any of the

following:

- Use a maximum of 3GB system memory if you are using a 32-bit Windows

®

OS.

- Install a 64-bit Windows

®

OS when you want to install 4GB or more on the

motherboard.

• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.

P8H61-M LX3 R2.0 Series Motherboard Qualified Vendors Lists (QVL)

Vendors

Part No.

Size

SS/DS Chip

Brand Chip NO. Timing

Voltage

DIMM socket

support (optional)

1DIMM

2DIMMs

CORSAIR CMGTX8(XMP)

8GB(2GB x 4)

SS

-

-

10-12-10-27 1.65V

G.SKILL

F3-19200CL11Q-16GBZHD(XMP1.3) 16GB(4GB x 4)

DS

-

-

11-11-11-31

1.65V

G.SKILL

F3-19200CL9D-4GBPIS(XMP)

4GB(2 x 2GB)

DS

-

-

9-11-9-28

1.65V

GEIL

GET34GB2400C9DC(XMP)

2GB

DS

-

-

9-11-9-27

1.65V

KINGMAX FLLE88F-C8KKAA HAIS(XMP)

2GB

SS

-

-

10-11-10-30

1.8V

Transcend TX2400KLU-4GK(427652)(XMP)

4GB(2 x 2GB)

SS

-

-

-

1.65V

Transcend TX2400KLU-4GK (381850)(XMP)

4GB(2 x 2GB)

SS

-

-

9

1.65V

Transcend TX2400KLU-4GK(374243)(XMP)

4GB(2 x 2GB)

DS

-

-

9

1.65V

PATRIOT PVV34G2400C9K(XMP)

4GB(2 x 2GB)

DS

-

-

9-11-9-27

1.65V

DDR3-2400 (O.C.) MHz capability

DDR3 1600 MHz and higher memory frequency is supported by Intel

®

3rd generation

processors.

This manual is related to the following products: