Asus P8P67 LX - Manual (Page 39)

ASUS P8P67 LX 1-28
5. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The S/PDIF module is purchased separately.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
4. CPU and chassis fan connectors
(4-pin CPU_FAN, 4-pin CHA_FAN1, 4-pin CHA_FAN2)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
• The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.
• CPU_FAN, CHA_FAN1 and CHA_FAN2 connectors support the ASUS Fan Xpert
feature.
• If you install two VGA cards, we recommend that you plug the rear chassis fan cable
to the motherboard connector labeled CHA_FAN1 or CHA_FAN 2 for better thermal
environment.
P8P67 LX
P8P67 LX fan connectors
CPU_FAN
CHA_FAN1
CPU
FA
N PWM
CPU
FA
N IN
CPU
FA
N PW
R
GND
CHA_FAN2
CHA
F
A
N PW
M
CHA
F
A
N IN
CHA
F
A
N PW
R
GND
GND
CHA FAN PWR
CHA FAN IN
CHA FAN PWM
SPDIF_OUT
+5
V
SPDIFOU
T
GND
P8P67 LX
P8P67 LX Digital audio connector