Asus M2N-LR/SATA - Manual (Page 86)

ASUS M2N-LR Series -
4.5.4 Hardware Monitor
Hardware Monitor
CPU1 Temperature [38ºC/100ºF]
MB Temperature [47ºC/114ºF]
CPU Fan1 Speed [3884RPM]
CPU Fan2 Speed [3648RPM]
Front Fan1 Speed [1917RPM]
Front Fan2 Speed [N/A]
Rear Fan1 Speed [N/A]
Rear Fan2 Speed [N/A]
Smart Fan Control [Disabled]
VCORE1 Voltage [ 1.320V]
3.3V Voltage [ 3.345V]
CPU1 Temperature
Resume on RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to [Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values.
Configuration options: [Enabled] [Disabled]
Resume on AC Power Loss [Disabled]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
CPU1 [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperature. Select [Ignored] if you do not wish to display the detected
temperatures.
CPU Fan1/Fan2 Speed [xxxxRPM] or [Ignored]
Front Fan1/Fan2 Speed [xxxxRPM] or [Ignored]
Rear Fan1/Fan2 Speed [xxxxRPM] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU, front,
and rear fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select [Ignored] if you do not wish to display the
detected temperatures.