Asus M2N-LR/SATA - Manual (Page 69)

- Chapter : BIOS setup
Hard Disk Write Protect [Disabled]
Enables or disables the device write protection. This will be effective only if device
is accessed through BIOS. Configuration options: [Disabled] [Enabled]
IDE Detect Time Out [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
ATA(PI) 80Pin Cable Detection [Host]
Selects the mechanism for detecting 80Pin ATA(PI) Cable.
Configuration options: [Host & Device] [Host] [Device]
RAID Setup
nVidia RAID Function [Disabled]
Disable/Enable nVidia
ROM.
nVidia RAID Function [Disabled]
Enables or disables the NVIDIA ® RAID function.
Configuration options: [Disabled] [Enabled]
The following items appear when this item is Enabled.
SATA0 Primary Channel [Disabled]
Sets the SATA0 Primary Channel as RAID.
Configuration options: [Disabled] [Enabled]
SATA0 Secondary Channel [Disabled]
Sets the SATA0 Secondary Channel as RAID.
Configuration options: [Disabled] [Enabled]
SATA1 Primary Channel [Disabled]
Sets the SATA1 Primary Channel as RAID.
Configuration options: [Disabled] [Enabled]
SATA1 Secondary Channel [Disabled]
Sets the SATA1 Secondary Channel as RAID.
Configuration options: [Disabled] [Enabled]
SATA2 Primary Channel [Disabled]
Sets the SATA2 Primary Channel as RAID.
Configuration options: [Disabled] [Enabled]
nVidia RAID Setup