Asus WL-320gE - Manual (Page 44)

3. Software
ASUS 802.11g Access Point
Chapter 3 - Software Configuration
W
eb (Common)
3.11. Factory Default
Restoring Factory Default Settings
Web Manager
You can reset all settings to their factory defaults through the web manager
using the “Factory Default” page in “Advanced Setup”. Click the Restore
button and wait about 30 seconds before trying to access the ASUS 802.11g
AP.
Hardware
You can reset all settings to their factory defaults manually by pushing the
“Restore” button in a hole on the back of the ASUS 802.11g AP while it
is ON. Use a pen or straightened paper clip to hold the “Restore” button
depressed over 5 seconds until the power LED on the front of the ASUS
802.11g AP starts blinking.
Note: You will be notified when factory default settings are restored
while using the web manager.