Asus WL-320gE - Manual (Page 26)

3. Software
26 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
Access Point
3. Quick Setup in AP mode
1. Click Next to enter the Quick Setup page. Follow the instructions to set
up the ASUS Access Point.
2 . S e t m o d e t o A P o r
WDS(Bridge), Station(Client) or
URE(Repeater).
3. Setting up your wireless interface.
Specify to your wireless router an
SSID (Service Set Identifier),
which is a unique identifier
attached to packets sent over
WLAN. This identifier emulates a
password when a device attempts
to communicate with your wireless
router via WLAN.
If you want to protect transmitted
data, select a Security Level to
enable encryption methods.
Medium: Only users with the same
WEP key settings can connect to your wireless router and transmit data using
64bits or 128bits WEP key encryption.
High: Only users with the same WPA pre-shared key settings can connect to
your wireless router and transmit data using TKIP encryption.
After you log in, you will see the ASUS 802.11g AP Home Page. The default
page will be the Access Point Mode.