beautypg.com

9 dram timing configuration, Dram timing configuration -15, Chapter 3 – Asus M4A79 Deluxe User Manual

Page 75: Dram command rate [auto, Dram timing mode [auto, Dct0/dct1 strength config. [auto

background image

ASUS M4A79 Deluxe

3-15

Chapter 3

DRAM Command Rate [Auto]

Configuration options: [Auto] [1T] [2T]

DRAM Timing Mode [Auto]

Configuration options: [Auto] [Both]

The following sub-items appear only when you set the DRAM Timing Mode item to [Both].

TCL [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only]
TRCD [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRTP [Auto]

Specifies the read CAS# to precharge time.

Configuration options: [Auto] [2-4 CLK] [3-5 CLK]
TRAS [Auto]

Configuration options: [Auto] [5 CLK] [6 CLK] – [17 CLK] [18 CLK]
TRC [Auto]

Configuration options: [Auto]
TWR [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRRD [Auto]

Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK]
TWTR [Auto]

Specifies the write to read delay when accessing the same DIMM.

Configuration options: [Auto] [1 CLK] [2 CLK] [3 CLK]
TRFC0/TRFC1 [Auto]

Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns]

DCT0/DCT1 Strength Config. [Auto]

Configuration options: [Auto] [DCT 0] [DCT 1] [Both]

3.5.9

DRAM Timing Configuration

Ai Tweaker

DRAM Timing Configuration

DRAM Command Rate

[Auto]

DRAM Timing Mode

[Auto]

DCT0/DCT1 Strength Config.

[Auto]

DRAM Command Rate:

1T: DRAM address and

control signals are

driven for one MEMCLK

cycle.

The configuration options for some of the following items vary depending on the DIMMs

you install on the motherboard.