Asus M4A79 Deluxe - Manual (Page 114)

4-18 Chapter 4: Software support
Chapter 4
Creating a RAID 10 configuration
To create a RAID 10 set:
1. In the Main Menu, press <2> to enter the “Define LD” function.
2.
Press , and the following screen appears.
3. Highlight the LD1 item and press to select RAID 10.
4. Move to the Assignment item by using the down arrow key and set Y to any four of
the drives.
5. Press + to save the setting. The utility prompts the following messages:
Press + to key in the desired capacity or press any key to continue.
6. The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
[↑]Up [↓]Down [ESC]Exit [Enter] Select
[ Keys Available ]
LD No RAID Mode Total Drv Capacity(MB) Status
LD 1 RAID 10 4 xxxxxx Functional
LD 2 ---- ---- ---- ----
LD 3 ---- ---- ---- ----
LD 4 ---- ---- ---- ----
LD 5 ---- ---- ---- ----
LD 6 ---- ---- ---- ----
LD 7 ---- ---- ---- ----
LD 8 ---- ---- ---- ----
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[↑]Up [↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
[ Keys Available ]
[ Define LD Menu ]
[ Define LD Menu ]
Channel:ID Drive Model Capacity (MB)
Assignment
1:Mas xxxxxxxxx xxxxxx Y
2:Mas xxxxxxxxx xxxxxx Y
3:Mas xxxxxxxxx xxxxxx Y
4:Mas xxxxxxxxx xxxxxx Y
LD No RAID Mode Total Drv
LD 1 RAID 10 4
Strip Block: 64 KB Fast Init: OFF
Gigabyte Boundary: ON Cache Mode: WriteThru
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
Press + to erase MBR or press any key to continue.
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...