beautypg.com

Step 2 connect ac power – Net Optics xStream 40 User Manual

Page 8

background image

8

Step 2

Connect AC Power

Caution: Always connect the earth electrical grounds first, and keep the earth grounds
connected whenever you are working on the device.

If possible, turn off the power to the power sources while you are making the power
connections.

If you are installing the device with AC connectors:

1. Plug one of the AC power cords to one of the AC power connectors on the rear

panel.

2. Plug the other end of the cord into an AC power circuit.
3. For redundant power, connect the other AC power cord to the other AC power

connector on the rear panel and plug the other end of the cord into a different
AC power source.