Net Optics xStream 40 - Manual (Page 4)

4
xStream 40 Content
This guide provides the initial steps to set up and configure the xStream 40
Appliance.
The xStream 40 Appliance package has been designed to protect your appliance
during shipping. Carefully unpack the xStream 40 chassis, power cords, screws, and
cables and verify you have the following components:
• (1) xStream 40 device with Aggregation, Filtering or Load Balancing software
installed
• (2) Power cords
• (1) Cable, 3 Meter, RJ45, CAT 5e 4-Pair
• (1) DB9 to RJ45 cable, 6 ft.
• Screws and washers for rack mounting the device
• Documentation: Quick Install Guide (this document), CD containing the
xStream 40 User Guide and xStream 40 CLI Command Reference
• Registration instructions and Extended Warranty, if purchased
The SFP, SFP+ and QSFP modules are ordered and shipped separately.
Contact Net Optics Technical Assurance Center if any component is missing or
damaged. Contact details are at the back of this guide.