Net Optics Flex Tap - Manual (Page 6)

2
Flex Tap Installation Guide
Unpack and Rack Mount the Flex Tap Rack Mount Panel
About This Guide
Please read this guide before attempting to install the Net Optics LC and MTP Flex Taps.
Unpacking and Inspection
Flex Taps are individually packaged in smaller cartons and are shipped in a larger, multi-pack shipping car-
ton. Carefully open the multi-pack shipping carton and remove the individual Flex Taps from the contain-
ers.
The LC Flex Tap multi-pack carton ships with the following:
• Flex Taps (ordered quantity up to 12 per multi-pack carton)
• Flex Tap Spacer (if ordererd)
• Quick Installation Guide (printed on each tap box)
Each MTP Flex Tap carton ships with the following:
• One MTP Flex Tap
• One MTP Y-cable
• Quick Installation Guide (printed on each MTP Flex Tap box)
You may have also ordered a Flex Tap Rack Mount panel for rack mounting and an extended warranty.
Carefully check the packing slip against parts received. If any part is missing or damaged, contact the Net
Optics Customer Service Department immediately.
Notes: _______________________________________________________________________________
The Flex Tap Rack Mount panel ships with a spacer unit for use with an odd number of LC Flex Tap
deployments. Do not discard.
_____________________________________________________________________________________
Unpack and Rack Mount the Flex Tap Rack Mount Panel
The Flex Tap Rack Mount panel is a purchased option and shipped in a separate carton. If you purchased a
Flex Tap Rack Mount panel, carefully remove the panel, mounting screws and the spacer from the shipping
carton.
1. Find an appropriate mounting location for the Flex Tap panel in your cabinet or equipment rack.
2. Use the four rack-mounting screws provided to secure the panel in place.