Billet Specialties Premium Tru Trac Serpentine System - Pontiac - Manual (Page 7)

www.billetspecialties.com www.billetspecialties.com
13
Figure 11: Install Crankshaft Pulley
Apply anti-seize to the four 5/16-18 x 1” socket head cap screws.
[A] Place the crank pulley on the damper, thread the four 5/16-18 x 1” socket head cap
screws with Bellville washers (cup facing pulley) through pulley and into damper, tighten
firmly (46ft/lbs).
Figure 12: Install Waterpump Pulley
Apply anti-seize to the four 5/16-24 x 3/4” socket head cap screws.
[A] Place water pump pulley on water pump shaft, thread the four 5/16-24 x 3/4” socket
head cap screws through the nose cone, pulley and into the water pump flange, tighten
firmly (28 ft/lbs).
Figure 10: Install Power Steering Pump & Pulley
For kits without power steering continue to Figure 11.
Apply anti-seize to the two 5/16-18 x 2-3/4" socket head cap screws.
[A] Place power steering pump to bracket and thread the two 5/16-18 x 2-3/4” socket head
cap screws with 5/16" split washers through the power steering pump bosses and into the
power steering bracket and tighten firmly (26 ft/lbs).
A A
A