Billet Specialties Premium Tru Trac Serpentine System - Pontiac User Manual
Page 2
x2
x1
x2
x2
x1
x1
x2
x1
x2
x2
5/16-18 x 2-3/4" - Socket Head Cap Screw
5/16-18 x 2-1/4" Block Mounting Stud
5/16-18
Hex Nut
3/8-16
Hex Nut
Addtional Parts
Not for Final
Assembly
3/8-16 x 4-3/4" Block Mounting Stud
15/16" Spacer
1-15/32" Spacer
1-1/16" Stand-off
1-1/16" Duplex
Stand-off
5/16-18 x 7/8" - Socket Head Cap Screw
Required Tools & Materials
Anti-seize Compound
RTV Silicone
Permatex Hylomar® Gasket Dressing
Gasket Scraper
Scotch-Brite® Pad
3/16" Allen
7/32" Allen
1/4" Allen
5/16" Allen
PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING ANY
COMPONENTS OF THE TRU TRAC SERPENTINE SYSTEM
5/8" Combo Wrench
11/16” Combo Wrench
Socket Wrench & Extension
3/8" 12pt. socket
10mm 12pt. socket
12mm 12pt. socket
Tech Line: 708.588.0505
Fax: 708.588.7181
www.billetspecialties.com
TECH TIP:
Billet Specialties recommends the use of Anti-Seize on all
fasteners to prevent thread lock-up.
Skin Board #1 - Packaged with Power Steering Pump
Skin Board #2 - Packaged with Water Pump
Prepping The Block:
• Disconnect battery.
• Remove all existing accessory drive brackets and components from motor.
• Remove water pump and divider plate.
• Scrape away gasket material and dress surface with a Scotch Brite® pad.
• Clean and inspect timing cover surface for pitting or other issues that may cause a leak.
• Now is a good time to replace the water
pump sleeves to ensure proper cooling.
Water pump sleeves are available at most
auto parts stores or Pontiac specialty shops
GM P/N 9796347.
x2
5/16"
Lock Washers