Billet Specialties Premium Tru Trac Serpentine System - Big Block Chevy - Manual (Page 5)

www.billetspecialties.com www.billetspecialties.com
9
Figure 3: Install Alternator Bracket
A] Install alternator bracket o-rings on both sides
B] Slide the alternator bracket onto the water pump studs on driver side of
block and seat against the block.
B
A
Figure 4: Install Water Pump & Spacer Nuts
Apply anti-seize to all exposed threads on the block mounting studs.
A] Slide the water pump over the four mounting studs.
B] Install the four spacer nuts that hold the water pump in place.
•The short spacer nut attaches to the passenger side lower stud.
•The long spacer nuts without a boss install on the three remaining studs.
•Tighten all firmly
Now would be a good time to install the heater hose fitting onto the
water pump.
A
B
Short Spacer Nut x1
Long Spacer Nut x3