Billet Specialties Premium Tru Trac Serpentine System - Small Block Chevy User Manual
Page 2
www.billetspecialties.com • Tech Line 708.588.0505
2
Small Block Chevrolet Tru Trac - 13225 / 13125
3
Required Tools & Materials
PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING ANY
COMPONENTS OF THE TRU TRAC SERPENTINE SYSTEM
Anti-seize Compound
LocTite 272 Thread Locker
RTV Silicone
Gasket Scraper
Scotch-Brite® Pad
3/8-16 Thread Chaser* & Holder
*Thread chasers are available at your local parts
store and are different from a thread cutting tap.
9/16”
Combination Wrench
5/8” Combination Wrench
11/16” Combination Wrench
3/4”
Combination Wrench
Socket Wrench & Extension
10mm 12pt. Socket
12mm 12pt. Socket
Tech Line: 708.588.0505
Fax: 708.588.7181
www.billetspecialties.com
TECH TIP:
Billet Specialties recommends the use of Anti-Seize on all fasteners
to prevent thread lock-up.
1/4” Hex Key
3/16” Hex Key
5/16” Hex Key
6mm Hex Key
Preparing The Engine Block
• Disconnect the battery.
• Remove existing alternator, air conditioning compressor and associated brackets.
• Remove all pulleys and water pump.
• Remove all traces of gasket and sealer with gasket scraper and Scotch Brite® pad.
• Clean threads in block by chasing with a 3/8-16 thread chaser.
Included Serpentine Belt
With P/S
Goodyear
6-Rib Poly-V Serpentine
Length: 50.5"
#4060505
Without P/S
Goodyear
6-Rib Poly-V Serpentine
Length: 48.5"
#4060485
Packaged With Power Steering Pump
Packaged With Water Pump
5/16-24 x 3" Socket Head Cap Screw
(Power Steering Pump)
x2
3/8-16 x 2" Socket Head Cap Screw
(Power Steering Bracket)
x2
x2
5/16"
Lock Washer
3/8-16 x 3" Block Mounting Stud
x3
3/8-16 x 4" Block Mounting Stud
x1
Spacer Nut - 1-3/4"
Spacer Nut - 2-11/16"
x3
x1
x2
3/8-16 Zinc Coated
Hex Nuts
(Discard After Use)