SENA NEMO10-SK - Manual (Page 52)

51
C.6 TCP Server Mode Operation Troubleshooting
Problem Cause Action
IP configuration of
remote host is invalid Check if IP configuration of the remote host is valid
Host mode of the
NEMO10 serial port is
not TCP server Change the host mode of the NEMO10 serial port to TCP server
or TCP server/client
IP address of the
NEMO10 or TCP port
number is wrong Specify valid IP address and TCP port number of the NEMO10
DSR option is set but
DSR input is not high Disable DSR option or make DSR input of the NEMO10 high
Cannot connect to
the NEMO10
TCP connection with
the other host is
established already Close established TCP connection or connect later
C.7 Serial Communication Troubleshooting
Problem Cause Action
Serial data are not
transferred by
TCP/IP immediately Too large inter-character
timeout Set inter-character timeout with smaller value
Cannot
communicate with
the NEMO10 Invalid serial port
configuration Check if serial port configuration of the NEMO10 are the same
with that of the serial device
Invalid data
transferred Invalid serial port
configuration Check if serial port configuration is correct.