SENA Parani-BCD110 - Manual (Page 8)

8
1.3. Product Specification
Parani-BCD110
Bluetooth Specifications Bluetooth v2.0 + EDR
Class1
Profile: SPP(Serial Port Profile)
Working distance:
By default antenna is 200m (0.12 mile),
Supports up to 1000m (0.62 mile)
Transmit Power
+18dBm Typical
Receive Sensitivity
-90dBm (0.1% BER)
Frequency range
2402MHz – 2480MHz
Serial Interface Serial UART speed up to 921.6kbps
CTS/RTS flow control, DTR/DSR for loop-back & full transfer
PIN Interface BCD110Sx: 1.27mm SMD Pad 18 x 2 (36pin)
BCD110Dx: 1.27mm Pin Header 18X2 (36pin)
Configuration ParaniWIN, ParaniWizard, Modem AT command set
Firmware Update ParaniUpdater
Power Consumption Nominal : 70mA @3.3Vdc
Maximum : 150mA @3.3Vdc (200mA @3.3Vdc in Test Mode)
Environmental Operating temperature: -40 ~ 80
o
C
Storage temperature: -40 ~ 85
o
C
Humidity : 90% (Non-condensing)
Physical properties Parani-BCD110 Dimension
DIP type
34.6 x 16.8 x 7.5 mm (0.661 in x 1.362 in x 0.295 in)
SMD type
34.6 x 14.8 x 3.0 mm (1.362 in x 0.583 in x 0.118 in)
Weight
Parani-BCD110SC: 2g
Parani-BCD110SU: 2g
Parani-BCD110DC: 3g
Parani-BCD110DU: 3g
Parani-BCD110DS: 4g
Approvals FCC, CE, IC, KC, TELEC, SIG
Warranty 1-year limited warranty